Decent product, nice and quiet on the lowest 2 fan settings, hence the 3 stars. Installation instructions are very poor though, very light on detail. Even worse, the screw positions on the template you stick to the wall are wrong! Once you've hung the appliance on the top 2 screws, the bottom ones don't line up. With the holes in the hood, they are about 30mm too high, as the hood drops by that much when hanging. Unbelievable they never tested this!

It is the exact extractor we were looking for to compliment and communicate with our induction hob. Performs well and is powerful if required.

Excellent product. Looks spot on with the matching induction hob. Easy to install. Only gripe was that the extract chimney bracket is designed to go flush to the ceiling/wall. If you have coving like we do you have to re drill the chimney lowet down but wasn't no drama.

Its really good, cooking smell disappear need to buy carbon filters that was hard to get they should put an option for extra buy atleat so no hassle to look around.

Very good extraction and commutation with the hob.

Good and efficient cooker hood, thought it would be quieter though, but still acceptable and happy with it

This unit is easy to install if you have any sort of knowledge as a DIYer Mine came with a euro plug fitted and I had to replace it which is not a problem, make sure you cut the wires to the correct size as the brown one must be the shortest oneIts no probem working with a Hob To Hood cooker but you can use it with any other cooker as you can manualy start the fansVery quiet to useNote carbon filters not required for outdoor extractionBreeze function is handy too

Bought this to compliment my AEG cooker It work very well and is a lot quicker than all the other hoods that I have had Easy to install but it must be noted that it has a 150mm external vent I would definitely buy another if need be